How to maintain the hydraulic cylinder?
The hydraulic cylinder is equivalent to the heart of the hydraulic system. Heart problems are difficult to repair, so the maintenance of the hydraulic cylinder must be careful and meticulous. Therefore, the maintenance of the hydraulic cylinder is the most important part of the maintenance of the entire hydraulic system. The following briefly introduces the maintenance of hydraulic cylinders.
1. Temperature. Control the system temperature. Excessive oil temperature will reduce the service life of the seal. Long-term high oil temperature will cause permanent deformation of the seal, or even complete failure.
2. Anti-rust. Because the piston part of the hydraulic oil cylinder needs to extend out of the oil cylinder in the working state, it will naturally be corroded by oxides and acid gases, which requires us to apply a proper amount of grease to protect it to avoid the piston as a load-bearing component Corroded and may break during work.
3. Open the box and change the oil. The hydraulic oil should be replaced regularly during the use of the cylinder, and the filter screen of the system should be cleaned to ensure cleanliness and extend the service life.
4. Speed, the speed is appropriate, do not exceed 2m/s, this can prolong the service life of the hydraulic cylinder. In addition, in order to protect the mechanism and safety, the internal buffer device is very effective for the protection of the hydraulic cylinder.
The above is an introduction to the maintenance of hydraulic cylinders, hope it will be helpful.
If you have any other questions or questions, please consult our online customer service.