Single-acting Cylinder Actuator Structure Work

When the pressure of the air source enters the middle cavity between the two pistons of the single-acting cylinder from the air port (2), the two pistons are separated and moved toward the ends of the cylinder, forcing the springs at both ends to compress, and the air in the air chambers at both ends is discharged through the air port (4) At the same time, the two piston racks simultaneously drive the output shaft (gear) to rotate counterclockwise. After the pressure of the air source is reversed by the solenoid valve, the two pistons of the single-acting cylinder move in the middle direction under the elastic force of the spring. The air in the middle air chamber is discharged from the air port (2), and the two piston racks simultaneously drive the output shaft ( The gear) rotates clockwise. (If the piston is installed in the opposite direction, the output shaft becomes reverse rotation when the spring is reset, which is a single-acting reverse rotation)