HSG series engineering snow plow cylinders are double-acting with single-piston rod hydraulic cylinders, there have hydraulic oil in both chambers.
Actions in both directions must be achieved by oil pressure, unilateral piston rod.
1. Use pressure
E-pressure rating, E: 16Mpa, G=21Mpa
Comparison table of pressure and cylinder diameter(ID) (base on 16Mpa)
Tube (inside diameter ID mm) | Full load condition （Push Ton） |
40 | 2.0 |
50 | 3.1 |
63 | 5.0 |
80 | 8.0 |
90 | 10.1 |
100 | 12.5 |
110 | 15.2 |
125 | 19.6 |
140 | 24.6 |
150 | 28.2 |
160 | 32.1 |
180 | 40.7 |
200 | 50.2 |
220 | 60.8 |
250 | 78.5 |
2.Product Usage
HSG hydraulic cylinder are mostly used in construction machinery, heavy machinery, hoisting machinery and mining machinery. In addition, when the cylinder has a relatively large force (such as 20 tons) and a relatively long stroke (such as more than 1.5 meters), the tie rod cylinder is not suitable because of the limited force of the screw rod, Therefore HSG engineering cylinders instead.
3. Snow Plow Cylinders Technical Parameter
Working pressure 16-21Mpa, tube diameter 40~250mm, rod diameter 20~125mm,
Maximum stroke<2000mm, temperature -40℃~+80℃
4. Optional installation method
· Clevis
· Cross tube
· Flange
· Tang
· Trunnion
· Spherical bearings
· Foot mount
5. How to order our snow plow cylinders?
If the hydraulic system pressure is below 16-21MPA, HSG snow plow cylinders can be used,
1) The cylinder tube and bore size can be selected
2) cylinder stroke;
3) Select the installation method