In order to adapt to the farm development of society and improve work efficiency, the current AG machinery and equipment are becoming larger and larger, and the efficiency is getting higher and higher. These large machines can complete work efficiently, without their core components, tractor loader hydraulic cylinders, and many gravity forces. All of the machinery must use tractor front loader hydraulic cylinders as the core of power transmission, and these tasks can only be completed with the help of farm hydraulic cylinders.
Application | Tractor Loader ,Dump truck, Tipper, Dump Trailer |
Material of cylinder tube | Alloy steel,Carbon steel,27SiMn,ST52 |
Seal | Hallite,SKF,NOK,Guarnitec,Parker |
Working pressure | 16MP, 18MP,22MP |
Bore size | 40mm to 800mm |
Stroke | to 12000mm or longer |
Color | Red black blue gray,or according to customer's requirements |
Mounting type | Earring-trunnion, double trunnion, double earring,or per customer's request |
Package | Shrink film, wooden pallet and carton |
Delivery time | 20-30 days after payment receiving |
1.Seamless tube standard: GB/T17396-2009
2.Raw materials are quenched and tempered; have better tensile strength and yield strength than direct cold drawn seamless tubes
3.Raw materials are tested for flaw detection
4.hydraulic cylinder can max working 220Bar, testing 280BAR
5.Raw materials are certified with materials and materials are traceable
6.Rod and each stage with hard chrome 20um
Our Tractor Loader Hydraulic Cylinders Advantage
1.Competitive price: have better price/performance ratio based on product and quality
2.Continuance service and support.
3.Diversified rich experienced skilled workers.
4.Custom R&D program coordination.
5.Application expertise.
6.Quality, reliability and long product life.
7.Mature, perfect and excellence, but simple design.
Product Introduction
Production detail
Product Process
Company Office
Deliver, shipping and serving
FAQ
East Timor customers consulted with us about Tractor Front Loader Hydraulic Cylinder
Q: Hydraulic cylinder thrust calculation
A: Hydraulic cylinder inner diameter = piston diameter = 200MM piston area = π (200 / 2) square = 3140 square mm = 31.4 square centimeter 25MPA = 250KG / square centimeter maximum thrust = pressure * piston area = 250 * 31.4 = 7850KG = 78500 Newton This is the maximum thrust.
Q: PLC+inverter+motor+pump+solenoid valve+cylinder combination can control the position accuracy of the cylinder?
A: 1. Hydraulic oil can be compressed. It is elastic like a spring. Therefore, in a general hydraulic servo system, the valve control is much more accurate than the pump control. Because the valve can be mounted close to the hydraulic cylinder, even on the hydraulic cylinder, the pump must pass through the oil pipe and then enter the hydraulic cylinder, which has a long distance, which greatly reduces the rigidity of the system and increases the difficulty of control. 2. The dosing pump is leaky first, and there is also a 10%-20% flow pulsation. Pump leakage is related to pressure and is non-linear.
Q: Hydraulic cylinder oil leakage
A: Several possibilities:
1. Between the piston rod and the guide sleeve:
(1) The hydraulic cylinder is not well stressed, and there is a radial force to cause an offset load between the piston rod and the guide sleeve, so that the oil seal is worn early and causes oil leakage.
(2) The ambient temperature of the piston rod is high, especially the radiant heat, and the oil seal aging is fast.
(3) Whether the oil seal is selected correctly; whether the oil seal is damaged during installation.
(4) Whether the tolerance between the guide sleeve and the piston rod is correct.
Second, between the guide sleeve and the cylinder: whether the O-ring on the guide sleeve is installed correctly, pay special attention to the O-ring can not be "rolled", especially some O-rings are closed and have a clamping line.
Third, the common problem: the guide sleeve, cylinder, piston rod concentricity. Fit tolerances are correct.
Q: Outdoor hydraulic cylinder working temperature?
A: Normal working temperature -30℃---100℃
We not only product farm hydraulic cylinders, we also design and product tractor loader hydraulic cylinders, about tractor front loader hydraulic cylinders more information,
please send us email, Our professional technicians will serve you.
Hot Tags: tractor front loader hydraulic cylinder, China, manufacturers, suppliers, factory, customized, buy, price, cheap, discount, for sale, hydraulic cylinder repair kit tractor supply, carbon hollow bar, Forklift Side Shift Cylinders, Synchronizing Two Hydraulic Cylinders, Long Stroke Hydraulic Jack, Double Rod Hydraulic Cylinder
