3-Stage Telescopic Hydraulic Cylinders for Dump Trucks & Trailers
Heavy-Duty Multi-Stage Tipping Cylinders | Single-Acting Gravity Drop & Custom Double-Acting Systems
DALLAST designs and manufactures multi-stage telescopic hydraulic cylinders engineered specifically for commercial dump bodies, tipper trailers, and agricultural tipping chassis. Featuring a compact retracted mounting length and an extended multi-stage stroke, our 3-stage cylinders deliver reliable lifting force under severe off-highway and construction working conditions.
Constructed from high-tensile 27SiMn alloy steel with hard chrome-plated stage sleeves, each cylinder is precision-machined to ensure superior bending resistance, low internal friction, and zero external leakage across operating pressures of 16 to 22 MPa (up to 220 bar).
Product Introduction
DALLAST is a high-tech enterprise specializing in the production of 3 stage hydraulic cylinder for dump truck actuators, hydraulic control systems and other automated hydraulic equipment. Since its establishment, DALLAST has always adhered to the management principle of talent-oriented and honest business.
DALLAST has strong technical strength, sophisticated equipment, advanced production technology and complete testing equipment. It has a group of experienced high-quality production technicians and has the ability to develop and develop new products. Dedication to provide quality and satisfactory service to our customers. Lifting force, stability is stronger, cylinder 27simn quenching and tempering treatment,
More resistant than ST52 / E355 / E460, strong pressure resistance, no deformation;
3 stage dump truck cylinder use sealing member has good sealing performance under the condition of -30°C-110°C, and it is not easy to leak oil. The cylinders of all levels have been treated with limit to avoid the hydraulic tipping rams falling off; it can meet the needs of customers more.
Model Description
① Level 4 stage
② Unit code
③ Pressure E: 160Bar /F210Bar
④ First stage size (mm)
⑤ Stroke (mm)
|
MODEL NO. |
Stage |
First Stage Diameter |
Stroke |
Largest Sleeve OD |
Closed length |
Mounting distance |
|
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
||
|
FC-3-110-2855 |
3 |
107 |
2855 |
152 |
1268 |
311 |
|
FC-3-110-3115 |
3 |
107 |
3115 |
152 |
1368 |
311 |
|
FC-3-110-3265 |
3 |
107 |
3265 |
152 |
1418 |
311 |
|
FC-3-110-3415 |
3 |
107 |
3415 |
152 |
1468 |
311 |
|
FC-3-110-3715 |
3 |
107 |
3715 |
152 |
1568 |
311 |
|
FC-3-129-3230 |
3 |
126 |
3230 |
219 |
1403 |
343 |
|
FC-3-129-3680 |
3 |
126 |
3680 |
219 |
1553 |
343 |
|
FC-3-129-3830 |
3 |
126 |
3830 |
219 |
1603 |
343 |
|
FC-3-129-4400 |
3 |
126 |
4400 |
219 |
1803 |
343 |
Prodection detail
Product Process
How to Select the Right 3-Stage Hydraulic Cylinder
The cyinder selection should be based on the dump body geometry, lifting load, installation space, required stroke and hydraulic system pressure, and must be verified by qualified engineers.
Selection Factor
Dump Body Length & Required Stroke
Consider the dump body length, lifting geometry, and target tipping angle to determine the required cylinder stroke.
Lifting Load
Ensure the cylinder's closed length and outer diameter fit the available truck frame and mounting space.
Installation Space
Ensure the cylinder's closed length and outer diameter fit the available truck frame and mounting space.
Working Pressure
Verify that the hydraulic system pressure and cylinder ratings meet the lifting force requirements at each stage.
Mounting Configuration
Check mounting types, pin dimensions, and connection points to ensure proper installation and compatibility.
Sizing & Engineering Selection Guide
Dump Body Length & Tipping Geometry
Provide body pivot position, rear overhang, and required tipping angle (typically 45° to 55°). These parameters define cylinder stroke, mechanical leverage, and trunnion mount locations.
01
Maximum Payload & Lift Capacity
Total tipping force must account for maximum gross load, body tare weight, adhesive materials (e.g., wet clay or asphalt), and safety factors during initial stage breakout.
02
Closed Center Distance & Installation Clearance
Confirm retracted pin-to-pin dimensions, head clearance behind the cab (front-end mount), or underbody space (underbody mount) throughout the full tipping arc.
03
Hydraulic System Compatibility
Verify pump flow rate (L/min) to determine cycle extension time, reservoir oil capacity to handle stage volume displacement, and relief valve settings.
04
Pivot Alignment & Mounting Configurations
Inspect top eye / ball bushing and bottom trunnion pin dimensions to prevent side-load forces and bending moments during uneven tipping surfaces.
05
Consult a Hydraulic Application Engineer
Global Markets & Export Experience
DALLAST supplies 3-stage telescopic hydraulic cylinders for dump trucks to customers across Asia, Europe, North America, South America, Africa, and the Middle East.We support truck manufacturers, equipment distributors, and aftermarket suppliers with standard models and customized hydraulic cylinder solutions. Our team assists with technical specifications, mounting compatibility, and order requirements to help customers source suitable cylinders for their applications.Contact us with your specifications or drawings to request technical assistance and a quotation.
Company Office
Production, Delivery & Global Shipping
DALLAST provides reliable production, quality inspection, and international shipping support for 3-stage telescopic hydraulic cylinders.We offer export packaging, flexible shipping options, and shipment coordination to ensure smooth delivery to customers worldwide.
FAQ
Ukraine customers consulted with us about 3 stage hydraulic cylinder for dump truck
Q: Can You Give Me Help If My Products are Very Urgent?
A: Yes, Of Course, We Will Try Our Best to Give You Help. Because We Have Our Own Factory to Produce. We Can Flexible to Adjust Our Production Schedule.
Q: How can you ensure the 3 stage hydraulic cylinder for dump truck product quality?
A: Before shipment, all the 3 stage hydraulic cylinder for dump truck have Withstand Pressure test, ensure products can transportation safety and normal use.
Q: What are our after-Sales Services?
A: a). We are willing to improve the quality of the products if there is any problem with your order.
b). Repairs are free of charge if the problem is due to manufacturing defects.
c). We are willing to comply with customers' reasonable requests.
Q: How many hours is your piston rod resistant to salt spray?
A: The surface of our specially treated piston rod is black, the finish is RA<0.2 um, the tensile strength and yield strength are both greater than 900MPA, the surface hardness is HV 900, and the neutral salt spray test is 1100 hours; it is especially suitable for alkaline use. Environment, if you have any needs in this regard, please contact us.
If interesting our 3 stage telescopic hydraulic cylinder for dump truck and get more information, please contact our sales department, we are professional manufacturer of telescopic hydraulic cylinder for tipper truck.
Hot Tags: 3 stage hydraulic cylinder for dump truck, China, manufacturers, suppliers, factory, customized, buy, price, cheap, discount, for sale, hydraulic top link cylinder cat 2, Horizontal Ram Jack, Hard Chrome Plated Piston Rod, Double Acting Tie Rod Hydraulic Cylinder, Forklift Hydraulic Lift Cylinder, dump bed cylinder
